This was one of my... guilty pleasures last week. Sorting a customer out with managing the design files across several sites, from a single source of storage.
Trimble Geospatial Connect is available at every field controller, at no extra cost for a single project, or included with the controller warranty for unlimited projects.
Easy as 1-2-3, to upload and download design files, jobs, stakeout reports...
traceability of jobs completed.. nice and simple.
#workflows#connectivity#ilikeitsimple#construction#roads#design#cadKOREC Grouphttps://lnkd.in/e72Ew7s8
Check out our latest video showcasing the incredible capabilities of the Trimble Access CAD Toolbar Measure Mode! 🎥✨
With the Measure Mode, you can now:
✅ Offset lines and arcs with up to FOUR additional offsets from the feature geometry measured with GNSS or Optical instruments.
✅ Perfect for collecting geometry of sidewalks, curbs, and gutters where the flowline is consistent with the flag and top of curb.
✅ Measure one point at each location and draw up to FIVE total lines from one measurement.
This tool is a game-changer for surveyors looking to save time and increase accuracy in their projects. Watch the video to see the Measure Mode in action, demonstrating:
🔹 Start and end lines
🔹 Adding smooth and tangential curves
🔹 Adding gaps to connecting lines
⚙️ Note: To use the MEASURE CAD TOOLBAR, ensure your Trimble Access job file includes a full Feature Code Library (*.FXL) with control codes for drawing lines, arcs, curves, rectangles, and offsets based on the measured feature coded points.
🎥 Watch now and elevate your surveying skills.
#SeilerGeospatial#TrimbleAccess#SurveyingTools#CADToolbar#MeasureMode#SurveyEfficiency#GNSS#OpticalInstruments#SurveyingInnovation
Check out our latest video showcasing the incredible capabilities of the Trimble Access CAD Toolbar Measure Mode! 🎥✨
With the Measure Mode, you can now:
✅ Offset lines and arcs with up to FOUR additional offsets from the feature geometry measured with GNSS or Optical instruments.
✅ Perfect for collecting geometry of sidewalks, curbs, and gutters where the flowline is consistent with the flag and top of curb.
✅ Measure one point at each location and draw up to FIVE total lines from one measurement.
This tool is a game-changer for surveyors looking to save time and increase accuracy in their projects. Watch the video to see the Measure Mode in action, demonstrating:
🔹 Start and end lines
🔹 Adding smooth and tangential curves
🔹 Adding gaps to connecting lines
⚙️ Note: To use the MEASURE CAD TOOLBAR, ensure your Trimble Access job file includes a full Feature Code Library (*.FXL) with control codes for drawing lines, arcs, curves, rectangles, and offsets based on the measured feature coded points.
🎥 Watch now and elevate your surveying skills.
#SeilerGeospatial#TrimbleAccess#SurveyingTools#CADToolbar#MeasureMode#SurveyEfficiency#GNSS#OpticalInstruments#SurveyingInnovation
Discover the powerful capabilities of the Trimble Access CAD Toolbar's MEASURE MODE in our latest video! 📏✨
Trimble Access now makes it easier than ever to:
🔵 Calculate and draw a circle through three collected points.
🟦 Compute a perfect rectangle from three measured points, or two measured points and a width.
To use the MEASURE CAD TOOLBAR, ensure your Trimble Access job file has a full Feature Code Library (*.FXL) that includes control codes to draw lines, arcs, curves, rectangles, and offsets based on the measured feature coded points.
Streamline your workflow and enhance your precision in the field. Watch the video now and see these features in action! 🔧📐
#TrimbleAccess#CADToolbar#MeasureMode#SeilerGeospatial#FieldSolutions#PrecisionMapping
Asking any BlueBeam experts on here?
Is it possible to extract the CAD vector data from a PDF or if possible to import the linework from a CAD file to overlay directly on the PDF file?
It can be done easily in TBC but I need to move the linework into bluebeam
Thanks in advance
🚪 3D technology opens new doors for construction site supervision.
Take a look, at the video below.
It shows different construction stages from the #construction of Tallinn's port D-terminal.
The visualizations are in the form of a #pointcloud. This collection of pointclouds allows for a visual, data centric verification and overview of the work conducted on a site.
Although, this might seem like some future tech solution on a construction site, it is actually possible TODAY. This is all the work of our product SiteView.
👉 https://lnkd.in/g9Nu5N8e
SiteView is an online environment which enables getting a quick overview of the #construction site, checking the quantities stored of materials, and comparing the design to reality.
If you have any questions about Siteview, write to us in the comments or send us a message! We are open to all questions.
#construction#supervision#siteview
Several Bluebeam features allow users to use color to make plan documents more efficient to work with. Check them out 👉 https://lnkd.in/eCukKg4T#bluebeam
Level up your field efficiency with X-PAD Ultimate! This powerful software for Android devices lets you control your GeoMax Positioning part of Hexagon surveying equipment and has a built-in CAD system. In this tutorial we will have a look at BIM tools for working on IFC files.
That means you can collect data, take measurements, and even edit drawings – all on the spot!
#surveying#construction#engineering#XPADUltimate
Discover the power of the Trimble Access CAD Toolbar MEASURE Mode! Perfect for surveyors using a Total Station or GNSS Rover, this tool streamlines fieldwork with graphical access to 15 control codes. 📏📐
🔹 Create and edit linework on the go.
🔹 Draw lines, polygons, areas, rectangles, and arcs with ease.
🔹 Use Feature Code Library (*.FXL) to simplify your workflow.
🔹 Measure points and let the software calculate perfect shapes.
To use the MEASURE CAD TOOLBAR, ensure your Trimble Access job file includes a full Feature Code Library (*.FXL) with control codes for drawing lines, arcs, curves, rectangles, and offsets based on the measured feature coded points.
No need to remember company control codes! The CAD Toolbar MEASURE Mode makes it intuitive and efficient.
👉 Ensure your feature library has defined feature codes and control codes.
👉 Note: The CAD Toolbar only works with points in the current job, not linked CSV or DXF files.
Need help? Check out the Trimble Access HELP file for step-by-step guides. If missing, re-run the Trimble Installation Manager and select the proper language file. 🌐
Watch the video now and elevate your surveying game! 🎬 #TrimbleAccess#CADToolbar#Surveying#Geospatial#SeilerGeospatial