Jan-Erik Schmitt’s Post

What do the evolution of inductive sensor technology and the platypus have in common? Just as the platypus impresses with its adaptability, inductive sensors are also flexible and robust for a wide range of applications. Contactless and wear-free, they master the most demanding environments and offer maximum reliability - ideal for industrial applications, from standard solutions to customised special requirements. Read our blog to find out how Balluff Americas Balluff EMEA sensors can withstand even the most extreme conditions and make processes more efficient thanks to state-of-the-art technology. 👉 https://lnkd.in/eAnPGz5X

What are the benefits of multi-sensor metrology? 🤔 Multi-sensor metrology uses multiple sensors to measure different aspects of a workpiece 📐 It is becoming increasingly important in the manufacturing industry because it offers a number of advantages over traditional single-sensor metrology systems, including speed, versatility and accuracy ⚡🎯 Discover the benefits 👉 https://ow.ly/zLzV50RShXx

While the two PREMET Devices differ in their capabilities, they both use the most modern and powerful sensor for the measurement. All following analytics rely on the quality of its signal; therefore, we did not cut any corners. The PREMETs are equipped with the most advanced SmartSensor from Kistler Group. Besides its incredible accuracy even under high temperatures it also features some quality-of-life improvements. For example, the calibration data is stored within the sensor. Exchanging of the sensor will therefore not need a recalibration of the device. But what about our acoustic emission sensor? Follow us to learn about it in our next week's post.

Proud to see NXP at the forefront of Industry 4.0! 💡 Our NAFE family of analog front-ends is helping factories become smarter, more flexible, and efficient. With the power to quickly reconfigure sensors and advanced diagnostics, smart factories are no longer a thing of the future — they're here today. 🌟 Learn more about this innovative tech!

Watch this short, 6-minute Tech Talk with RS Application Engineer Miguel Gudino Jr. to learn how Banner Engineering Q5X jam detection sensors are helping manufacturers prevent unplanned downtime and associated production and profit losses: https://weare.rs/3zRz5By #Q5X #JamDetection #sensors #manufacturing #downtime

Exciting things are happening at NXP! 🚀 Our reconfigurable Analog Front-Ends (AFEs) are revolutionizing smart factory efficiency. With software-configurable inputs and predictive maintenance features, reconfiguring factory floors just got a whole lot easier. Say goodbye to downtime and hello to intelligent automation! 👷♂️🔧 Dive into how we're shaping Industry 4.0!

Exciting things are happening at NXP! 🚀 Our reconfigurable Analog Front-Ends (AFEs) are revolutionizing smart factory efficiency. With software-configurable inputs and predictive maintenance features, reconfiguring factory floors just got a whole lot easier. Say goodbye to downtime and hello to intelligent automation! 👷♂️🔧 Dive into how we're shaping Industry 4.0!

Back on 3/11, we highlighted some of the key features of Kollmorgen's PCMM, and now it's time to uncover the incredible benefits! 🌟 Here's what PCMM brings to the table: 🔧 Minimize panel space, wiring costs, and build time ⏱️ Accelerate design with a scalable development environment 💡 Minimize risk, maximize performance with integrated AKD drive hardware ⚡️ Control multiple high-performance servo axes seamlessly Ready to dive deeper? Learn more about unleashing the power of PCMM here: https://bit.ly/3Tpl9Vd

I am Happy to announce that i designed THS SYSTEM --this system to made to limit temperature and save any system from HIGH TEMP 1-if the system temperature <40 the system is in normal mode and led indicator (Green led) is ON && FAN_1 ,2 are off 2-if the system temperature =40 the system is in Medium state and led indicator (Green led) is ON&& FAN_1 is ON ,2 is off 3-if the system temperature >40 ,<45 the system is in MAX state and led indicator (Green led) is ON&& FAN_1 is ON ,2 is ON 4-if the system temperature >45 the system is in Emergency state and led indicator (Green led) is OFF,(RED led)is turned ON&& ALL SYSTEM IS turned OFF ,BUZZER IS ON --i used to control l289n (H-Bridge) --this system consist of 3 layers --lcd to display dc motor state 1-Application layer this layer where system executed 2-hal layer -lcd driver -l298n driver -LM35 temperature sensor 3-mcal layer(this layer treat with MCU peripherals ) -Interrupt internal driver *interrupt external driver -timer0 driver -ADC driver -----i used ATmega328p MCU- tools : MPLAP XIDE

Exciting things are happening at NXP! 🚀 Our reconfigurable Analog Front-Ends (AFEs) are revolutionizing smart factory efficiency. With software-configurable inputs and predictive maintenance features, reconfiguring factory floors just got a whole lot easier. Say goodbye to downtime and hello to intelligent automation! 👷♂️🔧 Dive into how we're shaping Industry 4.0!