10 Valued Reasons to choose a Linde Truck

1- Hydrostatic Transmission

Technology can be copied. But experience cannot

Hydrostatic Transmission infinitely variable, suitable for heavy duty applications with continuous operations with the minimum service requirements during long intervals

Drive System Twin Pedal system: Easy Forward & Backward Movement

• No Wear & Tear of Brake system,
• No Differential System
• Clutch Box
• Gear/Direction Box

2 - Cost-Effectiveness

The right investment leads to real savings.

• Certified Forklift truck productivity test
• Performance comparison
• Energy costs
• Personnel cost
• Service costs

3 - Performance

Engineered for your performance

• Performance mode

High performance for maximum handling performance. Ideal for trucks with attachments, as well as long travel distances, including driving over ramps.

• Efficiency mode

As the default setting, the efficiency mode strikes a balance between performance and economy.This is the right mode if you want to control energy costs but don’t want to compromise too much on performance.

• Economy mode

A good example of when to use this mode is when clocked pallet conveyors are employed in the middle of production with narrow drive paths and speed restrictions. Economy mode enables careful load handling at reduced fuel consumption.

4 - Comfort

Comfortable working means better working.

• Ergonomic armrest with horizontal and vertical incremental adjustment.
• Super Comfortable Seat
• Noise and Vibration Decoupling
• Display
• Heating, Air-Conditioning System and Radio
• Stainless Steel Step Standard
• Entry Hand Hold
• Linde Dual-Pedal Control
• Linde Load Control

5 - Safety

Safety has priority.

• Active safety systems on board Linde trucks operate continuously for your benefit.
• Rapid Reversing
• Automatic Parking Brake
• Fully Hydraulic Steering
• High Degree of Stability
• Outstanding Visibility
• Low Noise Level
• Low Human Vibrations
• Stable Overhead Guard
• Duo-Sensitive Seat Belt
• Curve Assist
• Linde Engine Protection System (LEPS)
• BlueSpot
• LED Working lamps

6 - Drive

The drive makes all the difference

Diesel: This has been the number 1 drive type since trucks were first built. Linde currently offers a diesel drive system in combination with the original Linde hydrostatic system for trucks up to 18 t. A diesel particulate filter system is included as standard depending on the country of delivery. But even without a filter, with the latest Linde engine technology you are driving the world‘s most environmentally-friendly truck.

LPG: The ever stricter emissions legislation for diesel trucks (particularly in the EU and the USA) have accelerated the demand for LPG trucks. Particularly where use of the truck alternates between indoors and outdoors, and in sub-optimal ground conditions, they represent a genuine alternative to the conventional diesel truck – not least with regard to tax concessions granted by many countries for LPG vehicles. Thanks to the accurate residual quantity display based on ultrasound technology, it‘s just as easy to use replacement cylinders as it is an LPG truck with a tank. With Linde, you no longer need to waste time transporting bottles.

Natural gas (CNG): Even when compared with LPG trucks, a natural gas drive is a particularly environmentally friendly and economical alternative – especially for companies that already have a natural gas filling station. Linde offers fully equipped natural gas trucks ex works.

7 - Mast

Lift – and stay firmly grounded

• Overhead tilt cylinders
• Electronic end position damping

8 - Special Options

Special solutions for special requirements – available ex works.

• Raised Cab
• Rotating Driver‘s Workstation
• Ideal for Low Entrances

Heat-Resistant Foundry Design.

9 - Environment

Combining ecology with economy.

Controlled particulate emissions:

Particulate matter can damage your health. This has long been a well-known fact. But what few people realise is that one of the major causes of particulates is the abrasion effect of brake pads. Experts have calculated that the abrasion effect of a single forklift truck with conventional braking adds up to around 350 grams of particulate matter a year – an unnecessary burden on the environment. With the Linde hydrostatic system, all you need to do is take your foot off the pedal. The oil fl ow slows the truck down gently and smoothly, with no abrasion of tyres and brake pads and no particulate emissions whatsoever. The diesel engines employed by Linde achieve an unrivalled low level of particulate emissions, with the latest generation of engines at just 17% of the limit. The 30 kW version of the H25D emits two-thirds less CO2 than comparable competitors, achieving an unparalleled 0.104 g/kWh in an 8-stage test.

10 - Service

Quality service

Service – effective, competent, professional.

The total cost of ownership of a truck over its entire life cycle is a key parameter that has a signifi cant impact on cost effectiveness.

Personnel, energy and service costs make up the majority of the total cost. Our goal is to reduce these costs over the long term – and that starts with ensuring our trucks have a service-compatible design. To ensure that the solutions developed in theory are also the best ones in everyday practice, our developers rely on consistent feedback from the markets.

Through our 7000 qualified service technicians, we can record our customers‘ valuable suggestions and requests and focus them into particular subject areas. The task of the Linde designers is to convert customer feedback into ground-breaking technological solutions, ensuring our products undergo constant development. The top priority is to provide relevance for the customer, with all internal decision-making criteria coming second. After all, our slogan is: Customer first. The customer is at the heart of all our activities.