The factors cause the water jet cutting tube damage.

The main factor that causes the water jet cutting tube easy to damage is the tube quality. Include the raw tungsten carbide material and size.

  Without a high-quality mixing tube, the kerf widens, cutting speed is reduced, and cutting precision is diminished as the original optimum jet pattern and abrasive velocity are lost. Reject rates also are increased, and time is wasted replacing the mixing tube.

Superior wear water jet mixing nozzle reduces the frequency with which mixing tubes need replacing. That longer life also helps maintain the integrity of the jet pattern and velocity. The result is faster average cutting speeds, greater dimensional accuracy, the ability to perform longer uninterrupted cuts, and less downtime for mixing tube replacement.

Usually, there has abnormal damage to water jet tubes caused by not water jet tube factor.

1. Bad water quality causes abnormal damage to the focusing orifice, thus damaging the water jet focusing tube;

2. The design of the orifice or the combination of the orifice is not good, and the water flow is not normal;

3. The orifice has been worn out, causing turbulence, and the water flows are not concentrated;

4. The design and working accuracy of the water jet cutting head is not good, and the orifice still shifts before and after each installation, causing the center of the water flow to be incorrect;

5. The water and abrasive mixing space are poorly designed, causing turbulence;

6. The design of the water jet cutting head is bad, and the force when the orifice is fixed is different, which causes the direction of the water flow to shift and damage the water jet nozzle tube;

7. The steel and technology used in the water jet cutting head or orifice are not up to standard, which makes the accuracy change rapidly and causes the water flow to drift.

If you have any questions or needs for the tungsten carbide water jet mixing tubes that pls contact : Nancy Xia admin@zzbetter.com