How long is the life of FPC laser cutting machine?

The FPC laser cutting machine uses an UV laser, which is called a cold light source laser. It has the characteristics of small processing heat impact and high processing precision.

It is widely used in PCB cutting, FPC cutting, cover film cutting, silicon wafer cutting, glass cutting/scribing/texturing, PET film cutting, PI film cutting, copper foil and other ultra-thin metal cutting, composite material cutting, etc.

In the FPC processing industry, especially in the field of smart electronics, the processing requirements for FPC soft boards are getting higher and higher.

UV lasers have won the opportunity for rapid expansion, especially in the processing of FPC soft and hard boards.

Traditional punching machines cannot adapt to new processing techniques, and FPC UV laser cutting machines have become the darling of the market.

However, the initial investment cost is too high, so customers have stricter considerations on the value created by the equipment and the cost investment.

For example, the life of the FPC UV laser cutting machine and how to extend the life of the FPC UV laser cutting machine.

The service life of the FPC laser cutting machine is linked to the optical device, mainly the life of the laser.

The effective light emission time of the UV laser is 12,000-14,000 hours. According to the average power usage and working time, the effective working time of the UV laser is about 2-3 years.

So does the UV laser need to be replaced after 2-3 years?

The answer is no. It does not mean that the equipment cannot work, but the power is attenuated, and the efficiency of processing the same product will be reduced.

At this time, it is necessary to replace the optoelectronic module in the laser to ensure efficient processing efficiency.

Beyond Laser recommends that when replacing the laser device, send the customer a spare laser for use, and then replace the spare laser after the laser is replaced to ensure the customer's processing cycle and achieve humanized processing.

The life of the laser of the FPC laser cutting machine is also directly related to the brand, because the laser spot, peak power, average power, beam quality, and stability are all important factors for measuring the brand.

Beyond Laser FPC UV laser cutting machine uses imported lasers in processing hardware, which can effectively guarantee the service life and stability of customer equipment.

FPC laser cutting machine is a relatively delicate equipment.

Compared with fiber laser cutting machine, it has higher requirements for the environment and needs to be used under constant temperature conditions, usually at 22 degrees Celsius.

Secondly, it also has high requirements for the air environment used. It is usually used in dust-free workshops. If it is a dusty workshop, it will seriously affect the service life of the UV laser cutting machine.

Although FPC laser cutting machine is now the darling of the circuit board manufacturing industry, with the increasingly fierce market competition, the quality of various manufacturers has become different, which has also led to the premium depreciation of laser equipment.

Beyond Laser seeks high-quality and high-scientific research technology to grasp the market competition and create cost-effective equipment to meet customer needs!