How to use metal laser cutting machine correctly?
Sandy Sang
Factory/Manufacturer/Supplier of industrial laser machine (PCB/ FPC laser cutting, drilling, marking, coding, etching, engraving, depaneling...)
The following are the methods and skills for using metal laser cutting machines:
1. Inspect the steel belt before use to ensure that it is in a taut state. Avoid the possibility of injury to people during operation, which may even threaten life safety.
Therefore, it is very important to do a good job of details and make sure to do a good job of inspection every day.
2. Use a vacuum cleaner to suck out dust and dirt in the machine once a week, and all electrical cabinets should be closed tightly to prevent dust.
3. The guide rails should be cleaned frequently to remove dust and other debris to ensure the normal operation of the equipment. The racks should be wiped frequently and lubricated to ensure lubrication without debris.
The guide rails should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently. The machine can move better and cut more accurately during operation, and the quality of the cut products will be improved.
4. The motor ring should also be cleaned and lubricated regularly, which is conducive to ensuring the operation of the metal laser cutting machine, accurate cutting and quality of the cut products.
5. The dual-focal length laser cutting head is a vulnerable item on the metal laser cutting machine. Long-term use will cause damage to the laser cutting head.
Recommended by LinkedIn
6. Regular inspection and maintenance are required. If there is deformation or other forms, you should know that the laser cutting head may be a little damaged and needs to be replaced.
If it is not replaced, it will affect the cutting quality and increase costs. Some products may need to be processed again, reducing production efficiency.
The laser cutting head should be produced by a professional manufacturer. When purchasing, it should be carefully checked to avoid problems when it is used.
Finally, if you want to ensure the service life of the metal laser cutting machine, you need to check the straightness and verticality of its track every six months.
Once abnormalities are found, maintenance and debugging should be carried out in time. Otherwise, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done.