Enapter

Our #AEM Nexus helps bridge the gap between fundamental research and practical applications in this MW-sized H2 real-world lab👇 Located at the Braunschweig Research Airport and spanning 4,700m², the siz energieplus Hydrogen Terminal serves as a hub for research expertise along the H2 value chain in the megawatt range. At its core is our containerised 1 MW AEM Nexus 1000 electrolyser. Equipped with 420 modular AEM Stacks, this first commercial unit is capable of producing up to 450 kg of H2 per day. Powered by an impressive local PV system, the AEM Nexus 1000 will soon supply onsite green hydrogen and processed electrolysis waste heat for various applications within this multi-purpose project. The large-scale electrolysis system was planned and integrated together with our partner H2 Core Systems GmbH. We're proud that our megawatt-class AEM Electrolyser is making a strong contribution to this exciting project. ⬇️ 𝗗𝗼 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗵𝗮𝘃𝗲 𝘆𝗼𝘂𝗿 𝗼𝘄𝗻 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 𝗶𝗻 𝘁𝗵𝗲 𝗽𝗶𝗽𝗲𝗹𝗶𝗻𝗲? Then get in touch with our team and request your AEM Electrolyser quote today: ▶️ https://lnkd.in/ettpr_Wf ◀️ #greenhydrogen #energytransition #energiewende #wasserstoff Bildnachweis O-Töne: Braunschweig Zukunft GmbH - Economic Development

Nium aims to decarbonise one of our planet's most polluting chemical industrial processes. 👇Here’s how our #AEM Electrolysers contribute to their impact: Very recently, our UK partner Creo International Ltd successfully commissioned an AEM Electrolyser system for Nium. From food to fuel, energy to shipping – the London-based company is on a mission to eliminate emissions at scale while disrupting and decentralising the dirty $75 billion ammonia market. “We have developed an incredibly energy-efficient chemical reactor that synthesises ammonia at a fraction of the cost and pollution of traditional electrochemical and Haber-Bosch systems”, says Dr Yubiao Niu, Co-founder and CSO at Nium. Their nanotechnology can adapt seamlessly to any hydrogen feedstock, and its low-pressure and low-temperature operation results in a low energy requirement that copes with power supply fluctuations, perfectly suited for renewable energy sources. That’s why our modular AEM Electrolysers are a perfect match for Nium’s flexible and decentralised solution. The current test set-up includes 5 of our compact AEM EL 4 electrolysers, as well as an Enapter dryer and water tank. From initial engagement to final setup, the entire process took our partner Creo less than two months – a testament to their team's agility and dedication. We’re proud to contribute to this clean innovation – and ready to scale up with Nium as their technology grows. ⬇️𝗔𝗿𝗲 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝘁𝗼 𝗽𝗶𝗹𝗼𝘁, 𝗽𝗿𝗼𝘃𝗲 𝗮𝗻𝗱 𝗲𝘃𝗲𝗻𝘁𝘂𝗮𝗹𝗹𝘆 𝘀𝗰𝗮𝗹𝗲 𝘂𝗽 𝘆𝗼𝘂𝗿 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁? Then request your AEM Electrolyser quote today: ▶️ https://lnkd.in/duAaNGG4 ◀️ #greenhydrogen #electrolyzer #Nium #greenammonia

This is the world’s first grid-supportive solar hydrogen home – and it’s ready to power through winter❄️⬇️ Today, most buildings with PV systems and batteries have a major challenge. Too much electricity in summer and too little in winter. This places an increasing burden on distribution grids. And it requires fossil reserve power plants. This is where the #FlexEhome steps in. Its goal: • Providing both thermal & electrical energy self-sufficiency • While being able to contribute to the grid • Supplying energy very second of the year At its core is #picea, a long-term energy storage system by our partner HPS Home Power Solutions AG that draws on Enapter’s #AEM Electrolyser tech. A good year has passed now since a family moved into the building near Berlin. ▶️Time to take stock as the dark season has already begun: Picea has converted excess summer solar power into green hydrogen: With 3,000 kWh of H2 fully stored, the FlexEhome is ready for winter’s dark months. It even took advantage of sunny October days to top up the H2 supply. Hydrogen, being a gas, contracts as temperatures drop. This means storage pressure decreases with colder weather, even at full capacity. So, in October – and even one day in November – picea produced extra H2 to fill the newly available space. Combined with a heat pump and fuel cell waste heat, this system maximises energy use for the family through the cold season. 𝗔𝗿𝗲 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝗳𝗼𝗿 𝗮 𝗹𝗼𝗻𝗴-𝘁𝗲𝗿𝗺 𝗲𝗻𝗲𝗿𝗴𝘆 𝘀𝘁𝗼𝗿𝗮𝗴𝗲 𝘀𝗼𝗹𝘂𝘁𝗶𝗼𝗻 𝗼𝗿 𝗮𝗻𝘆 𝗼𝘁𝗵𝗲𝗿 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝘀𝘆𝘀𝘁𝗲𝗺? 👇Then reach out to our partner HPS Home Power Solutions AG directly or request your quote for our AEM Electrolysers from the Enapter team today: ▶️ https://lnkd.in/ea_eqGqj ◀️

This month’s newsletter not only brings you several exciting updates on both the electrolyser hardware and software fronts, but also our special final season deal:   First up, we’re excited to share the product advances in our 0.5 and 1 MW AEM Nexus systems and the news of the very first MW-scale AEM Electrolyser system in China – and also to introduce Enapter’s Energy Management System Toolkit 3.0. But there’s more: ✅Insights from Hydrogen Technology Expo Europe Hamburg ✅Upcoming Enapter events ✅Our top job openings ✅And ... 👇    Pay attention, there is a special offer hidden further down in this newsletter... 🤫    Here’s the shortcut to our limited EU offer: ▶ https://lnkd.in/et3UF8uF ◀ This special deal is only valid within the EU until Dec 06, 2024.   #greenhydrogen #electrolyzer #wasserstoff #idrogenoverde

Final Season Deal👇Secure your #AEM hydrogen production set 𝗻𝗼𝘄 and benefit from our limited EU offer: At Enapter, we empower organisations to pilot, prove and eventually scale up their green hydrogen projects with our modular AEM Electrolysers. More than 5,000 units are being used in various applications in 55+ countries, including many in pilots, research use cases and training programmes. Our compact AEM EL 4 electrolysers are straightforward to commission, use and maintain with the EMS Toolkit, our control software enabling remote monitoring in real-time. This special production set is a fully integrated system capable of producing up to 3kg of green hydrogen per 24h. The set includes: • 3 x 2.4 kW AEM EL 4 electrolysers • 1 x Enapter Dryer for 99.999% H2 quality (5.0) • 1 x Enapter Water Tank • Energy Management System incl. App • Pre-assembly in a 19-inch rack (32 U) • Complete piping and internal cabling • Shipping costs in the EU • Full Manual and Quick-Start Guide And exclusively with this deal: 6 months extended warranty. Every system is 100% tested with a detailed factory acceptance test. After arrival, simply unwrap your package in your prepared workspace, connect to power and pipes, scan the QR codes and fill the electrolyte. You’re ready to start H2 production. ⬇️ 𝗧𝗵𝗶𝘀 𝗹𝗶𝗺𝗶𝘁𝗲𝗱 𝗼𝗳𝗳𝗲𝗿 𝗶𝘀 𝗼𝗻𝗹𝘆 𝘃𝗮𝗹𝗶𝗱 𝘄𝗶𝘁𝗵𝗶𝗻 𝘁𝗵𝗲 𝗘𝗨 𝘂𝗻𝘁𝗶𝗹 𝗗𝗲𝗰 𝟬𝟲 𝟮𝟬𝟮𝟰. Submit your quote request t͟o͟d͟a͟y͟ to secure this special deal: ▶️ https://lnkd.in/dcMFATPx ◀️ And if you’re located outside the EU, don’t hesitate to get in touch. #greenhydrogen #electrolyzer #wasserstoff #idrogenoverde

Here’s how our updated MW-sized #AEM Nexus electrolyser ensures maximised green hydrogen production from intermittent renewables⤵️ Based on learnings from the successful deployment of pre-series systems, we further improved our modular 0.5 MW and 1 MW electrolyser systems. Here’s the AEM Nexus 1000 at a glance: • Power consumption: 53 kWh/kg H2 • Production rate: 210 Nm³/h | 453 kg/24h • Operational flexibility: 3-100% • Hydrogen purity:  99.999% with optional dryer • Outlet pressure: up to 35 barg Today, we’re excited to share the latest developments in these systems. Let’s dive deeper into the details: The updated AEM Nexus electrolyser container stands out with a 25% reduced footprint of 40 ft, which makes it easier to transport and quicker to set up. Further developments in the design of the system also make commissioning and maintenance easier. The proven modular and scalable design of the AEM Nexus remains in the updated series, offering the same exceptional flexibility for operating with fluctuating renewable energies. This megawatt electrolyser contains 420 AEM Stacks, which are organised in strings holding 10 modules each and assembled in a total of four sets. The individual strings can be ramped up or down independently of each other, allowing the system to react flexibly to fluctuating power loads. With operational flexibility of 3-100%, the AEM Nexus enables optimum utilisation of renewable energy with maximum efficiency and achieves a production capacity of around 450 kg of hydrogen per 24 hours. Another advantage of the system is its high reliability. Thanks to the AEM Nexus’s modular architecture, bottlenecks are minimised and single points of failure are eliminated. The system also remains operational during maintenance work as the set of strings undergoing maintenance can be switched off separately while the remaining three sets continue to produce green hydrogen. This minimises downtime and significantly reduces maintenance costs, maximises the availability of the system and ensures efficient hydrogen production. With its flexible and robust design, easy handling and outstanding efficiency, the AEM Nexus is the ideal solution for companies that want to optimise their green hydrogen production and get the most out of their renewable energies. 👇𝗗𝗼 𝘆𝗼𝘂 𝗽𝗹𝗮𝗻 𝘁𝗼 𝗱𝗲𝗰𝗮𝗿𝗯𝗼𝗻𝗶𝘀𝗲 𝘆𝗼𝘂𝗿 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 𝘄𝗶𝘁𝗵 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻? Then request your quote for our AEM Electrolysers today, meeting your needs from the kW scale to the MW range: ▶️ https://lnkd.in/ddPEpjJu ◀️ #greenhydrogen #electrolyzer #idrogenoverde #wasserstoff

The beauty of green hydrogen. 💚 We designed this all-in-one #AEM Electrolyser system together with our Italian partner Loccioni. The 20ft container can accommodate to 42 single-core units at the same time. It enables our R&D team at the Enapter Campus to test all our different AEM EL 4 electrolyser modules (AC, DC, air-cooled, liquid-cooled) under one roof. Powered by local renewables from the nearby Bioenergiepark and enhanced by our software approach, the collected data will help us to further refine our compact systems. 𝗔𝗿𝗲 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝘁𝗼 𝘀𝘁𝗮𝗿𝘁 𝘆𝗼𝘂𝗿 𝗼𝘄𝗻 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁 – for research purposes or any other kind of application? 👇 Then request your quote for our scalable AEM Electrolysers now: ▶️ https://lnkd.in/eV78mjKP ◀️ #greenhydrogen #electrolyzer #wasserstoff #idrogenoverde

This is how a European company is positioned to roll out multi-megawatts of #AEM Electrolyser capacity in China at high speed👇 Last year, we signed a framework supply contract worth more than €6 million with Wolong Electric Group Co., Ltd. - one of the world’s top three motor and drive manufacturers. In February 2024, our partnership entered into a new phase. We signed a Joint Venture agreement to form Wolong Enapter Hydrogen Technology Ltd. As China’s demand for AEM Electrolysers is increasing significantly compared to PEM systems, the ambitious goal is to gain a pioneering and substantial market share in the country’s growing green hydrogen sector. That’s why the JV team worked with urgency to make Enapter’s modular AEM Electrolysers competitive with existing technologies in China. After a very productive start at the Enapter facilities, the team continued with ongoing alignments both remotely and at Wolong’s facilities in Shangyu. Only 8 months later, the Wolong Enapter JV unveiled China’s first domestically-produced 1 MW AEM Electrolyser and started series production of AEM Nexus earlier last month. What a fantastic achievement in record time! The JV has also already signed several memoranda of understanding (MoU) for the AEM Nexus with companies in China. 𝗔𝗿𝗲 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝘁𝗼 𝘀𝘁𝗮𝗿𝘁 𝘆𝗼𝘂𝗿 𝗼𝘄𝗻 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁? ⬇️ Then get in touch with our team 𝘁𝗼𝗱𝗮𝘆 and request your budgetary quotation for an AEM Electrolyser: ▶️ https://lnkd.in/dP7Hdzpp ◀️ #greenhydrogen #electrolyzer #wasserstoff #idrogenoverde

We proudly present: Our updated #AEM Nexus megawatt electrolyser with a 25% more compact design and further developments⬇️ After the successful deployment of our first AEM Nexus systems in Europe in 2023 and 2024, we have continued refining the design of these 0.5 MW and 1 MW electrolyser systems. The proven modular and scalable design of the AEM Nexus remains in the updated series, offering: • Best-in-class operational flexibility • Quick response to intermittent renewables • Built-in stack redundancy But it now stands out even more with: • 25% reduced footprint • Easier transport as a 40-foot containerised system • Simplified commissioning & maintenance With its flexible and robust design, easy handling and outstanding efficiency, the AEM Nexus electrolyser is the ideal solution for companies that want to optimise their green hydrogen production and get the most out of their renewable energies. 𝗗𝗼 𝘆𝗼𝘂 𝗽𝗹𝗮𝗻 𝘁𝗼 𝗱𝗲𝗰𝗮𝗿𝗯𝗼𝗻𝗶𝘀𝗲 𝘆𝗼𝘂𝗿 𝗼𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 𝘄𝗶𝘁𝗵 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻? 👇 Then request your quote for one of our AEM Electrolysers today, meeting your needs from the kW scale to the MW range: ▶️ https://lnkd.in/dhTMf8gA ◀️ #greenhydrogen #electrolyzer #idrogenoverde #wasserstoff

Wrapping up another fantastic two days at the Hydrogen Technology Expo Europe in #Hamburg: Once again, one thing stood out in particular⬇️ With over 15,000 visitors and a significantly growing international presence, the event proved to be a reflection of the growing hydrogen economy. Our team noted a highly interested specialist audience this year in Hamburg. Interestingly, this audience was surprisingly diverse – from private individuals to small businesses and industrial players. That made them the perfect match for Enapter’s modular #AEM Electrolysers, meeting hydrogen needs from kW scale up to the MW range. But what really stood out was this: 🤝 It’s all about strong partnerships. Four of our long-standing partners displayed real AEM Electrolysers onsite: • JAG | JA-Gastechnology GmbH • H2 Core Systems GmbH • Easy Energy Companies & Consulting SA • FutureE GmbH - The Energy Hub Further partners like sera Group also spread the word about our AEM tech at their booths. Our partner Mikuni Kikai Kogyo Co. Ltd. even traveled all the way from Japan to discuss new projects. The good thing about these strong partnerships is the joint growth potential. Our many discussions focused not only on new single-core pilot applications, but also on the expansion to industrial-scale multi-core projects and the launch of our Core Partnerships. Core Partners can order Enapter AEM Electrolyser stacks to construct their own customised #AEMpowered electrolysers. 𝗔𝗿𝗲 𝘆𝗼𝘂 𝗮𝗹𝘀𝗼 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝘁𝗼 𝗽𝗶𝗹𝗼𝘁 𝗼𝗿 𝘀𝗰𝗮𝗹𝗲 𝘂𝗽 𝘆𝗼𝘂𝗿 𝗴𝗿𝗲𝗲𝗻 𝗵𝘆𝗱𝗿𝗼𝗴𝗲𝗻 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻?👇 Then get in touch with our team 𝘁𝗼𝗱𝗮𝘆 and request your commitment-free quote: ▶️ https://lnkd.in/dnH2B5Pv ◀️ #greenhydrogen #electrolyzer #hydrogentechnologyexpo #HTE2024